引用本文:孟光伟,李槐树.无位置传感器双绕组永磁BLDCM起动控制系统[J].电力自动化设备,2011,31(3):
MENG Guangwei,LI Huaishu.Startup control system of sensorless permanent magnet BLDCM with dual windings[J].Electric Power Automation Equipment,2011,31(3):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4521次   下载 2753  
无位置传感器双绕组永磁BLDCM起动控制系统
孟光伟1, 李槐树2
1.海军工程大学 电气工程系,湖北 武汉 430033;2.海军工程大学 电气工程系,湖北 武汉 430034
摘要:
提出了具有SVPWM控制和电流调节控制的无位置传感器双绕组无刷直流电机(BLDCM)的起动控制,其中电流调节控制采用两点式比较器控制。该起动控制方法不但能有效控制起动电流大小,而且能改善BLDCM开环起动性能。在Matlab/Simulink环境下,建立双绕组永磁BLDCM起动控制系统的仿真模型。设计了基于DSP2407A的双绕组BLDCM控制电路,并通过软件编程的方式实现了SVPWM的开环起动控制。仿真和实验结果一致,且结果表明了理论分析的正确性。
关键词:  无刷直流电机  电压空间矢量  起动控制  仿真
DOI:
分类号:
基金项目:
Startup control system of sensorless permanent magnet BLDCM with dual windings
MENG Guangwei,LI Huaishu
Department of Electrical Engineering,Naval University of Engineering,Wuhan 430033,China
Abstract:
A startup control strategy with SVPWM and current regulation is proposed for the sensorless permanent magnet BLDCM(BrushLess DC Motor) with dual windings. Two-point comparator is used in its current regulation control. It controls the startup current efficiently and improves the open-loop startup performance of BLDCM. The simulation model of startup control system for permanent magnet BLDCM with dual windings is built with Matlab/Simulink software,the control circuit of BLDCM is designed based on DSP2407A chip, and the open-loop control is programmed for SVPWM. The simulative results are consistent with the experimental results,which show the correctness of the proposed control strategy.
Key words:  brushless DC motor  voltage space vector  startup control  simulation

用微信扫一扫

用微信扫一扫