引用本文:王天霖,杨墨缘,高崇,曹华珍,吴亚雄,张真,欧阳森.多端口直流断路器可靠性评估模型及其应用[J].电力自动化设备,2021,41(12):
WANG Tianlin,YANG Moyuan,GAO Chong,CAO Huazhen,WU Yaxiong,ZHANG Zhen,OUYANG Sen.Reliability evaluation model of multi-terminal DC circuit breaker and its application[J].Electric Power Automation Equipment,2021,41(12):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3011次   下载 1269  
多端口直流断路器可靠性评估模型及其应用
王天霖1, 杨墨缘2, 高崇1, 曹华珍1, 吴亚雄1, 张真2, 欧阳森2
1.广东电网有限责任公司电网规划研究中心,广东 广州 510030;2.华南理工大学 电力学院,广东 广州 510640
摘要:
多端口直流断路器(MTCB)是未来实现多端换流站联络及故障快速隔离的核心设备,其可靠性直接影响多端直流配电网的可靠性水平。首先分析了MTCB拓扑结构及工作原理。然后以珠海“互联网+”示范工程中应用的三端口混合式直流断路器为例,基于工程可靠性原理并考虑器件冗余建立MTCB可靠性评估模型。然后分析了MTCB对多端直流配电网可靠性的影响。最后基于唐家湾三端直流配电网结构进行算例分析,计算了MTCB在不同设计模式、冗余分析下的可靠性情况,进行了MTCB对多端直流配电网可靠性的影响分析及灵敏度分析,验证了所提模型的正确性和有效性。
关键词:  多端口  直流断路器  直流配电网  可靠性评估  冗余分析
DOI:10.16081/j.epae.202108026
分类号:TM561
基金项目:国家自然科学基金资助项目(51677073);中国南方电网公司科技项目(GDKJXM20173253)
Reliability evaluation model of multi-terminal DC circuit breaker and its application
WANG Tianlin1, YANG Moyuan2, GAO Chong1, CAO Huazhen1, WU Yaxiong1, ZHANG Zhen2, OUYANG Sen2
1.Power System Planning Research Center of Guangdong Power Grid Co.,Ltd.,Guangzhou 510030, China;2.School of Electric Power, South China University of Technology, Guangzhou 510640, China
Abstract:
MTCB(Multi-Terminal DC Circuit Breaker) is the core equipment to realize the connection and fault isolation of multi-terminal converter station in the future, and its reliability directly affects the reliability level of multi-terminal DC distribution network. Firstly, the topology and working principle of MTCB are analyzed. Then, taking the three-terminal hybrid DC circuit breaker in Zhuhai “Internet plus” demonstration project as an example, based on the engineering reliability principle and considering the redundancy level of devices, MTCB reliability evaluation model is established. The influence of MTCB on the reliability of multi-terminal DC distribution network is analyzed. Finally, based on the structure of Tangjiawan three-terminal DC distribution network, the reliability of MTCB under different design modes and redundancy levels is calculated. The influence analysis and sensitivity analysis of MTCB on the reliability of multi-terminal DC distribution network are carried out, and the correctness and effectiveness of the proposed model are verified.
Key words:  multi-terminal  DC circuit breaker  DC distribution network  reliability evaluation  redundancy analysis

用微信扫一扫

用微信扫一扫