引用本文:刘钊,肖白露,康勇,段善旭.基于D-STATCOM的串联解耦控制[J].电力自动化设备,2009,(5):
.Series decoupling control based on D-STATCOM[J].Electric Power Automation Equipment,2009,(5):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3930次   下载 23  
基于D-STATCOM的串联解耦控制
刘钊,肖白露,康勇,段善旭
作者单位
摘要:
串联解耦和状态反馈解耦是目前常用的解耦控制方法.在配电网静止同步补偿器(D-STATCOM)中,由于电流d-q变换后存在耦合,常需要采用解耦控制.针对传统的状态反馈解耦对系统参数的变化较敏感的缺点,采用串联解耦对D-STATCOM进行控制.建立了D-STATCOM同步旋转坐标系下的数学模型,得出其d-q电流之间存在耦合;针对D-STATCOM的数学模型设计了基于串联解耦控制的控制器;为了对比串联解耦和状态反馈解耦的效果,分别推导了当系统参数发生变化时它们的系统传递函数,通过分析传递函数的波特图从控制理论的角度定性地得出串联解耦控制的鲁棒性和动态性能要优于状态反馈解耦控制.仿真结果也表明串联解耦控制具有鲁棒性好、响应速度快的特点.
关键词:  配电网静止同步补偿器  串联解耦  状态反馈解耦  相对增益  鲁棒性
DOI:
分类号:TM761
基金项目:国家自然科学基金?
Series decoupling control based on D-STATCOM
LIU Zhao  XIAO Bailu  KANG Yong  DUAN Shanxu
Abstract:
As there exists coupling among the dq currents of D-STATCOM,decoupling control is normally needed,of which,series decoupling and state feedback decoupling are commonly used.The series decoupling is used to control D-STATCOM control because the state-feedback decoupling is more sensitive to system parameter variation.The mathematical model of D-STATCOM under synchronous rotating coordinates is established and there is coupling between dq currents,for which the series decoupling controller is designed.To comp...
Key words:  D-STATCOM  series decoupling  state-feedback decoupling  relative gain  robustness  

用微信扫一扫

用微信扫一扫