|
| 摘要: |
| PC／104总线和CAN总线之间的转换大部分使用的是智能接口，用单片机处理接口逻辑。提出了一种无需单片机的非智能接口方式，采用Philips的CAN(Controller Area Network)总线接口芯片SJA1000．以适当的逻辑电路配合实现从数据、地址总线分开的PC／104总线到数据、地址线复用的sJA1000的转换。 |
| 关键词: PC／104总线 CAN总线 接口 SJA1000 |
| DOI： |
| 分类号:TP302 |
| 基金项目: |
|
| Interfacing between PC/104 bus and CAN bus |
|
WU Fang-ying WU Di
|
| Abstract: |
| The interfacing between PC / 104 bus and CAN (Controller Area Network) bus is normally based on microprocessor,which deals with the interfacing logic. A non-intelligent interfacing circuit is put forward,in which SJA1000,a stand-alone CAN controller,is used to interface PC / 104 bus and CAN bus combined with certain logic circuits. |
| Key words: PC /104 bus,CAN bus,interface circuit,SJA1000, |
