引用本文:江俊敏,刘惠康.基于PEBB的并联有源电力滤波器在立辊轧机中应用[J].电力自动化设备,2006,(11):64-66,82
.Application of PEBB-based shunt active power filter in rolling mill[J].Electric Power Automation Equipment,2006,(11):64-66,82
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3526次   下载 1313 本文二维码信息
码上扫一扫!
基于PEBB的并联有源电力滤波器在立辊轧机中应用
江俊敏,刘惠康
作者单位
摘要:
有源电力滤波器是一种用于动态抑制谐波、补偿无功功率的新型电力电子装置。基于电子组块PEBB(PowerElectronicBuildingBlock)的有源电力滤波器的控制系统主要由谐波检测电路和补偿电流发生电路组成,其基本原理是由谐波检测电路检测出被补偿对象的谐波电流,然后经过补偿电流发生电路采用滞环比较方法控制补偿电流的变化,最后得到期望的电源电流。该装置采用比例积分(PI)控制器使直流侧电容电压维持在要求的水平。该装置通过现场的智能仪表和系统管理软件可以对电能质量进行监视与校正,在立辊轧机上的实验运行取得了良好的效果。
关键词:  有源电力滤波器,谐波,动态补偿,电力电子组块
DOI:
分类号:TM713
基金项目:国家自然科学基金
Application of PEBB-based shunt active power filter in rolling mill
JIANG Jun-min  LIU Hui-kang
Abstract:
APF(Active Power Filter) is a kind of electric power equipment for dynamic harmonic suppre-ssion and var compensation.The APF control system based on PEBB(Power Electronic Building Block) is composed mainly of harmonic detection circuit and compensation current generation circuit,which detects the harmonic current by the harmonic detection circuit and controls the change of compensation current by the compensation current generation circuit applying stagnant loop comparison method to obtain the expected source current.The PI(Proportional-Integral) controller is used to maintain the required capacitive voltage at the DC side.With field intelligent instrument and system management software,the system can be used to monitor and adjust the power quality.It runs well in experimental operation. This project is supported by the National Natural Science Foundation of China(60074032).
Key words:  active power filter,harmonics,dynamic compensation,PEBB

用微信扫一扫

用微信扫一扫