引用本文:钱 霞,袁建华,高厚磊,高 峰.直流微电网光伏发电最大功率点追踪方法[J].电力自动化设备,2012,32(6):
QIAN Xia,YUAN Jianhua,GAO Houlei,GAO Feng.MPPT of photovoltaic generation for DC microgrid[J].Electric Power Automation Equipment,2012,32(6):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4894次   下载 106  
直流微电网光伏发电最大功率点追踪方法
钱 霞1, 袁建华2,3, 高厚磊3, 高 峰3
1.中国华电集团公司,北京 100031;2.三峡大学 电气与新能源学院,湖北 宜昌 443002;3.山东大学 电气工程学院,山东 济南 250061
摘要:
基于直流微电网母线电压稳定的实际情况,获得光伏电源电压和直流变换器占空比的函数关系,把占空比作为输入变量,在仅需测量光伏电源电流的基础上对其准确实施最大功率点追踪;可省略光伏发电直流微电网中众多分布式光伏电源端电压传感器及其相关电路,减少干扰,提高可靠性,降低系统成本。MATLAB下系统模型仿真和样机试验证明了所提控制方法的正确性与可行性。
关键词:  光伏发电  光伏电池  直流微电网  电压传感器  占空比  最大功率点追踪
DOI:
分类号:
基金项目:山东省科技攻关项目(210GGX10706)
MPPT of photovoltaic generation for DC microgrid
QIAN Xia1, YUAN Jianhua2,3, GAO Houlei3, GAO Feng3
1.China Huadian Corporation,Beijing 100031,China;2.School of Electrical Engineering & Renewable Energy,China Three Gorges University,Yichang 443002,China;3.School of Electrical Engineering,Shandong University,Ji’nan 250061,China
Abstract:
MPPT(Maximum Power Point Tracking) is normally applied to photovoltaic system of DC microgrid and traditional method is to directly measure the real-time voltage and current by sensors. Since the bus voltage of DC microgrid is actually stable,the functional relationship between the photovoltaic voltage and the duty cycle of DC-DC converter can be obtained. A method of MPPT is proposed,which takes the duty cycle as the input variable and only measures the photovoltaic current,a number of voltage sensors and associated circuitry being cancelled. It reduces the interference and system cost and improves the system reliability. Simulation with MATLAB and experiment with prototype prove the correctness and validity of the proposed method.
Key words:  photovoltaic generation  photovoltaic cells  DC microgrid  voltage sensor  duty cycle  MPPT

用微信扫一扫

用微信扫一扫