引用本文:杨 昆,陈 磊,陈国柱.DSTATCOM补偿不平衡负载分序控制策略[J].电力自动化设备,2012,32(7):
YANG Kun,CHEN Lei,CHEN Guozhu.Individual sequence control of DSTATCOM compensation for unbalanced load[J].Electric Power Automation Equipment,2012,32(7):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4384次   下载 61  
DSTATCOM补偿不平衡负载分序控制策略
杨 昆, 陈 磊, 陈国柱
浙江大学 电气工程学院,浙江 杭州 310027
摘要:
通过分析负载不平衡时各序等效电路,建立了配电网静止同步补偿器(DSTATCOM)在各序等效电路中的数学模型,并提出了分序控制策略。针对负载电流正、负序分量三相对称的特点,分别在正、负序同步旋转坐标系下进行补偿,而零序分量在三相坐标系进行补偿,为了提高补偿精度,同时抑制装置本身产生低次谐波和扰动,引入重复控制。最后在MATLAB/Simulink环境中搭建10Mvar/10kV DSTATCOM系统进行仿真验证,证明了新型控制策略补偿不平衡负载的有效性,并且具有一定抑制电网电压不平衡的能力。
关键词:  DSTATCOM  不平衡补偿  分序控制  重复控制  控制  数学模型
DOI:
分类号:
基金项目:国家自然科学基金资助项目(51177147);浙江省重点科技创新团队项目(2010R50021)
Individual sequence control of DSTATCOM compensation for unbalanced load
YANG Kun, CHEN Lei, CHEN Guozhu
College of Electrical Engineering,Zhejiang University,Hangzhou 310027,China
Abstract:
The equivalent circuit of each sequence is analyzed for unbalanced load,the mathematical model of DSTATCOM in each sequence is established and the individual sequence control is proposed. For the positive and negative sequence components of load current are symmetry in three phases,they are compensated in the synchronous rotating coordinates system of positive and negative sequence respectively,while the zero sequence component is compensated in the three-phase coordinates system. The repetitive control is introduced to improve the compensation accuracy and suppress the low-order harmonics and disturbances. A 10Mvar/10kV DSTATCOM simulation system is built in MATLAB/Simulink and the results show the effectiveness of the proposed control strategy of compensation for unbalanced load and its ability in the grid voltage imbalance suppression.
Key words:  DSTATCOM  unbalance compensation  individual sequence control  repetitive control  control  mathematical models

用微信扫一扫

用微信扫一扫