引用本文:王 多,常 康,薛 峰,靳 丹,方勇杰,于跃海.基于RTDS与MATLAB的双馈感应风电机组动态特性仿真比较[J].电力自动化设备,2012,32(12):
WANG Duo,CHANG Kang,XUE Feng,JIN Dan,FANG Yongjie,YU Yuehai.Comparison of DFIG dynamic characteristics simulation between RTDS and MATLAB[J].Electric Power Automation Equipment,2012,32(12):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4778次   下载 87  
基于RTDS与MATLAB的双馈感应风电机组动态特性仿真比较
王 多1, 常 康2, 薛 峰2, 靳 丹1, 方勇杰2, 于跃海2
1.甘肃省电力公司,甘肃 兰州 730050;2.国网电力科学研究院,江苏 南京 210003
摘要:
以MATLAB/Simulink中双馈感应风电机组(DFIG)的平均值模型为依据,首先在RTDS/RSCAD中相应搭建DFIG的平均值模型;然后对MATLAB与RTDS的仿真方法进行比较;最后在单机无穷大系统中分别就初值、风速扰动和故障扰动下的变速风电机组的动态响应特性在MATLAB和RTDS平台上进行比较验证。仿真结果表明,RTDS不仅可准确移植其他平台的风机模型,而且可以在始终保持仿真-实际时间比为1.0的前提下提供更详细的状态量信息。
关键词:  双馈感应风电机组  模型  仿真  RTDS  MATLAB  风电
DOI:
分类号:
基金项目:国家认定企业技术中心创新能力专项项目([2008]2012)
Comparison of DFIG dynamic characteristics simulation between RTDS and MATLAB
WANG Duo1, CHANG Kang2, XUE Feng2, JIN Dan1, FANG Yongjie2, YU Yuehai2
1.Gansu Electric Power Corporation,Lanzhou 730050,China;2.State Grid Electric Power Research Institute,Nanjing 210003,China
Abstract:
The DFIG(Doubly-Fed Induction Generator) average model is constructed on RTDS/RSCAD platform based on the DFIG average model of MATLAB/Simulink and the simulation method is compared between MATLAB and RTDS. Based on a constructed one-machine-infinite-bus system,the dynamic response characteristics of DFIG are simulated on MATLAB and RTDS platforms respectively for comparative validation,including initial value,wind speed disturbance and fault disturbance. Simulative results show that,RTDS can accurately transplant the DFIG model from other simulation platforms,and provide more detailed information about state variables while keeps the ratio of simulation time to real process time as 1.0.
Key words:  doubly-fed induction generator  models  computer simulation  RTDS  MATLAB  wind power

用微信扫一扫

用微信扫一扫