引用本文: | 王海柱,蔡泽祥,张延旭,邵向潮,李一泉,竹之涵.提升智能变电站信息流实时性和可靠性的定质交换技术[J].电力自动化设备,2014,34(5): |
| WANG Haizhu,CAI Zexiang,ZHANG Yanxu,SHAO Xiangchao,LI Yiquan,ZHU Zhihan.Custom switching technology to improve reliability and real-time performance of information flow in smart substation[J].Electric Power Automation Equipment,2014,34(5): |
|
摘要: |
首先基于OPNET仿真平台,从传输时延抖动、丢包以及传输路径等角度,分析了通用交换技术应用于智能变电站信息交换时存在的不足。然后从满足智能变电站信息流的实时性和可靠性需求出发,提出了定质交换实现技术。该技术基于多协议标签交换(MPLS)的多级子队列实现报文的分层调度,基于区域划分实现动态缓存分配,基于路径消耗为报文提供多种路径选择。最后结合实际智能变电站,在OPNET平台上构建了共网传输场景下的定质交换模型,仿真结果说明了所提定质交换技术能够合理地分配交换资源,是可行和有效的。 |
关键词: 智能变电站 定质交换 信息流 实时性 可靠性 通信 |
DOI: |
分类号: |
基金项目:广东省科技计划项目(2010B010900028) |
|
Custom switching technology to improve reliability and real-time performance of information flow in smart substation |
WANG Haizhu1, CAI Zexiang1, ZHANG Yanxu1, SHAO Xiangchao1, LI Yiquan2, ZHU Zhihan3
|
1.College of Electrical Engineering,South China University of Technology,Guangzhou 510640,China;2.Guangdong Power Dispatch Centre,Guangzhou 510600,China;3.Guangzhou PtSwitch Co.,Ltd.,Guangzhou 510665,China
|
Abstract: |
Based on OPNET simulation platform,the deficiency of general switching technology applied in the switching of smart substation information is analyzed from different aspects:transmission delay jitter,packet loss,transmission path,etc. An implementation technology of custom switching is proposed to improve the reliability and real-time performance of smart substation information flow,which hierarchically dispatches the messages based on the multi-layer subqueue with MPLS(Multiple Protocol Label Switching),dynamically allocates the buffer based on the buffer division,supports multiple paths for message transfer based on the path loss. A custom switching model is established on OPNET simulation platform for an actual smart substation,where different information flows share a network,and the simulative results show that,the switching resources are reasonably allocated and the proposed switching technology is feasible and effective. |
Key words: smart substation custom switching information flow real-time reliability communication |