引用本文:熊 兰,徐敏捷,杨子康,赵艳龙,焦 阳.高压开关柜电缆室温度场分析及在线监测系统构建[J].电力自动化设备,2014,34(6):
XIONG Lan,XU Minjie,YANG Zikang,ZHAO Yanlong,JIAO Yang.Thermal field analysis for cable room of high-voltage switchgear and design of online monitoring system[J].Electric Power Automation Equipment,2014,34(6):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5033次   下载 2017  
高压开关柜电缆室温度场分析及在线监测系统构建
熊 兰1, 徐敏捷1, 杨子康1, 赵艳龙2, 焦 阳1
1.重庆大学 输配电装备及系统安全与新技术国家重点实验室,重庆 400044;2.湖州电力局,浙江 湖州 313000
摘要:
基于固体导热微分方程、对流换热方程、辐射换热方程建立NXAIR型开关柜电缆室的热传导、对流及辐射的多物理场耦合数学模型。同时,基于Navier-Stokes方程建立了电缆室内空气流场模型,考察空气流动的散热效果。以上数值计算通过Comsol软件利用有限元方法求解。计算结果表明,由于导电斑点和氧化膜的存在,电缆接头处温度较其他部位偏高,并且空气散热效果甚微,应成为监测重点。基于计算结果开发了一套开关柜电缆室温度在线监测系统。系统用红外传感器进行接头温度采集,以C8051F单片机为核心构建现场监测系统,并且基于Labview平台开发上位机软件,对数据进行有效管理。
关键词:  开关柜  电缆  温度  传热  有限元  监测  模型
DOI:
分类号:
基金项目:重庆市电力公司科技基金项目(2012-58)
Thermal field analysis for cable room of high-voltage switchgear and design of online monitoring system
XIONG Lan1, XU Minjie1, YANG Zikang1, ZHAO Yanlong2, JIAO Yang1
1.State Key Laboratory of Power Transmission Equipments & System Security and New Technology,Chongqing University,Chongqing 400044,China;2.Huzhou Electricity Bureau,Huzhou 313000,China
Abstract:
A multi-physics coupling model of cable room in NXAIR switchgear is established based on the solid heat conduction equation,heat convection equation and heat radiation equation,while an air flow field model of cable room is established based on Navier-Stokes equation to study the heat dissipation effect. The FEM(Finite Element Method) is applied to solve these models with Comsol software. The calculative results show that,the cable joints have higher temperature because of the contact spots and oxide film and much slighter heat dissipation effect,which should be emphatically monitored. Based on the calculative results,an online temperature monitoring system is developed for the switchgear cable room,which applies the infrared sensors to sample the joint temperatures,takes MCU C8051F as its core and programs the superordinate unit software on Labview platform for effective data management.
Key words:  switchgear  electric cables  temperature  heat conduction  finite element  monitoring  models

用微信扫一扫

用微信扫一扫