引用本文:雷霄,孙栩,李新年,庞广恒,王华伟,阮思烨,刘琳.适应大容量直流接入弱受端的直流极控系统优化控制方法[J].电力自动化设备,2017,37(9):
LEI Xiao,SUN Xu,LI Xinnian,PANG Guangheng,WANG Huawei,RUAN Siye,LIU Lin.Optimization methods of pole control system for large-capacity HVDC accessing to weak receiving system[J].Electric Power Automation Equipment,2017,37(9):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 12695次   下载 1446  
适应大容量直流接入弱受端的直流极控系统优化控制方法
雷霄1, 孙栩1, 李新年1, 庞广恒1, 王华伟1, 阮思烨2, 刘琳1
1.中国电力科学研究院,北京 100192;2.国家电力调度控制中心,北京 100031
摘要:
大容量直流接入较弱受端系统,换流母线电压相对敏感,故障扰动易引起直流换相失败甚至发生连续换相失败。针对弱受端交流故障恢复过程中可能出现的连续换相失败问题,提出了根据交流系统和直流系统关键变量,在线计算调整低压限流功能直流电压上限值的方法,使直流的恢复速度能适应交流系统的恢复状态,避免连续换相失败的发生;提出了逆变站调节器配合和分接头控制的优化方法,使逆变站进入定直流电压控制模式,能在一定程度上减小远端故障引发换相失败的概率。利用与实际直流工程极控系统完全一致的仿真模型进行仿真验证,仿真结果表明:所提出的优化方法可行、有效,能适应弱受端系统对于抵御换相失败的需求,有利于改善交直流系统运行稳定性。
关键词:  高压直流输电  弱受端  直流极控系统  低压限流功能  换相失败
DOI:10.16081/j.issn.1006-6047.2017.09.029
分类号:TM721.1
基金项目:国家电网公司科技项目(XT71-15-045)
Optimization methods of pole control system for large-capacity HVDC accessing to weak receiving system
LEI Xiao1, SUN Xu1, LI Xinnian1, PANG Guangheng1, WANG Huawei1, RUAN Siye2, LIU Lin1
1.China Electric Power Research Institute, Beijing 100192, China;2.National Electric Power Dispatching and Control Center, Beijing 100031, China
Abstract:
In the case of large-capacity HVDC accessing to weak receiving system, since the converter bus voltage is relatively sensitive, fault disturbance may easily induce commutation failure, even continuous commutation failures. Aiming at the possible continuous commutation failures during the fault recovery process of weak receiving system, a method to on-line calculate the upper DC voltage limit of VDCOL function according to the key variables of AC and DC systems is put forward, which adapts the recovery speed of DC system to the recovery state of AC system to avoid the continuous commutation failures. The optimization methods for the regulator coordination and tap changer control of inverter station are also put forward, which makes the inverter station operating in the constant DC voltage control mode to reduce the probability of commutation failure caused by distal fault. A simulation model of HVDC pole control system in accordance with actual system is built and the simulative results show that, the proposed optimization methods are feasible and effective in meeting the requirement of weak receiving system against the commutation failure and improving the operating stability of AC/DC system.
Key words:  HVDC power transmission  weak receiving system  pole control system  VDCOL function  commutation failure

用微信扫一扫

用微信扫一扫