引用本文:郑旭,裴志宏,王少荣,程时杰.可控串补暂态特性的动模试验研究[J].电力自动化设备,2005,(6):17-21
.Study on transient characteristics of TCSC with dynamic simulation[J].Electric Power Automation Equipment,2005,(6):17-21
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3904次   下载 1250 本文二维码信息
码上扫一扫!
可控串补暂态特性的动模试验研究
郑旭,裴志宏,王少荣,程时杰
作者单位
摘要:
分析了可控串补TCSC(Thyristor Controlled Series Compensation)分别以电容电压和线路电流为同步信号,在容性微调区从高补偿区向低补偿区及反方向阶跃跳变时。基频阻抗的暂态变化过程。研究了在不同同步信号下,感性区和容性区相互转换时TCSC的暂态特性,指出从容性区转换到感性区以及从感性区转换到容性区阻断模式时,两种同步信号下的暂态过程相似:但由感性区转换到容性微调区时,电容电压同步信号下需先将TCSC切换到阻断模式,待进入稳态后再调节补偿度,而线路电流同步信号下则可直接进行。
关键词:  同步信号  暂态特性
DOI:
分类号:TM761
基金项目:
Study on transient characteristics of TCSC with dynamic simulation
ZHENG Xu  PEI Zhi-hong  Wang Shao-rong  CHENG Shi-jie
Abstract:
Respectively with capacitive voltage and line current as the synchronization signal,the transient impedance characteristics of TCSC(Thyristor Controlled Series Compensation)during step change from high compensation to low compensation of the capacitive vernier region or vice versa are analyzed. The transient characteristics of TCSC during transitions between inductive region and capacitive region under different synchronization signals are studies. During the transition from capacitive region to inductive region or from inductive region to capacitive block mode,the transient processes under both synchronization signals are similar. However,during transition from inductive region to capacitive vernier region,it is necessary for TCSC under capacitive voltage synchronization signal to transit first to block mode and then adjust the compensation degree after steady,while under line current synchronization signal,it is not neccessary.
Key words:  TCSC

用微信扫一扫

用微信扫一扫