引用本文:丁卫红,赵建洋.并行多通道间谐波宽带测试方法[J].电力自动化设备,2011,31(10):
DING Weihong,ZHAO Jianyang.Multi-channel parallel broadband inter-harmonic test[J].Electric Power Automation Equipment,2011,31(10):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4032次   下载 83  
并行多通道间谐波宽带测试方法
丁卫红1, 赵建洋2,3
1.淮阴工学院 电子与电气学院,江苏 淮安 223003;2.淮阴工学院 计算机学院,江苏 淮安 223003;3.南京航空航天大学 航空宇航学院,江苏 南京 210016
摘要:
针对电站等电力场所多点谐波动态检测的难点,提出基于多输入、多输出系统测试方法,对输入、输出频响进行复指数拟合,得到全频段的间谐波参数。该方法在研制的并行测试系统中应用,实现了主、从结构测试与分析系统,主站引擎软件作为主控平台协同控制各从站,实现从站的内部多通道同步、从站之间的脉冲同步和远程GPS同步。测试表明该方法能够在全频带范围一次计算出所有间谐波参数,动态范围高于109 dB,通道间相移小于0.12°。
关键词:  电能质量  间谐波  谐波分析  宽带测试  多通道  同步
DOI:
分类号:
基金项目:国家自然科学基金资助项目(50575101);江苏省科技支撑资助项目(BE2009100)
Multi-channel parallel broadband inter-harmonic test
DING Weihong1, ZHAO Jianyang2,3
1.Faculty of Electronic and Electrical Engineering,Huaiyin Institute of Technology,Huaian 223003,China;2.Faculty of Computer Engineering,Huaiyin Institute of Technology,Huaian 223003,China;3.College of Aerospace Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China
Abstract:
The test method based on multi-input and multi-output system is proposed for the multi-point dynamic inter-harmonic test,which carries out the complex exponential fitting for input/output frequency responses to obtain the inter-harmonic parameters covering whole spectrum. It is applied in a test and analysis system with master-slaver structure. As the master control platform,the master station engine software controls coordinately all slave stations to realize the multi-channel synchronization within a slave station,the pulse synchronization among slave stations and the remote GPS synchronization. It obtains all inter-harmonics covering whole spectrum in one calculation,with the DR higher than 109dB and the phase shift between channels less than 0.12 degree.
Key words:  power quality  inter - harmonics  harmonic analysis  broadband test  multi-channel  synchronization

用微信扫一扫

用微信扫一扫