引用本文:李金鑫,李欣然,张永旺,邓 威,徐振华,刘乾勇.考虑牵引负荷模型的暂态稳定计算[J].电力自动化设备,2013,33(4):
LI Jinxin,LI Xinran,ZHANG Yongwang,DENG Wei,XU Zhenhua,LIU Qianyong.Transient stability calculation considering traction load model[J].Electric Power Automation Equipment,2013,33(4):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5281次   下载 1964  
考虑牵引负荷模型的暂态稳定计算
李金鑫1, 李欣然1, 张永旺2, 邓 威1, 徐振华1, 刘乾勇1
1.湖南大学 电气与信息工程学院,湖南 长沙 410082;2.广东电网公司电力科学研究院,广东 广州 510080
摘要:
利用PSASP的用户程序接口(UPI)功能,在Windows环境下,采用动态链接库交换文件数据信息,实现将一种牵引负荷模型接入电网进行暂态稳定仿真计算。对比牵引负荷模型与传统负荷模型对系统暂态稳定计算的影响,结果表明:牵引负荷模型对电压扰动的敏感度大于恒阻抗模型而小于感应电动机模型;牵引负荷模型的功角阻尼特性优于恒阻抗模型而次于感应电动机模型,且随着牵引负荷比例的提高,阻尼比增大,故障极限清除时间减小;与感应电动机模型相比,采用牵引负荷模型时的暂态稳定性更高。
关键词:  牵引  负荷  模型  PSASP/UPI  暂态分析  稳定性  仿真
DOI:
分类号:
基金项目:高等学校博士学科点专项科研基金资助项目(20070-532052)
Transient stability calculation considering traction load model
LI Jinxin1, LI Xinran1, ZHANG Yongwang2, DENG Wei1, XU Zhenhua1, LIU Qianyong1
1.College of Electrical and Information Engineering,Hunan University,Changsha 410082,China;2.Electric Power Research Institute of Guangdong Power Grid Corporation,Guangzhou 510080,China
Abstract:
The UPI(User Program Interface) function of PSASP is adopted to embed the traction load model into power grid for the calculation of transient stability simulation in Windows environment by exchanging the file and data information with the dynamic link library. Its impact on system transient stability is compared between traction load model and conventional load model,and results show that,the sensitivity of traction load model to voltage disturbance is bigger than that of constant impedance model while smaller than that of inductive motor model;the power-angle and damping characteristic of traction load model is superior to that of constant impedance model while inferior to that of inductive motor model;along with the increase of traction load penetration,the damping rate raises while the critical clearance time decreases;the transient stability calculated with traction load model is higher than that calculated with inductive motor model.
Key words:  electric traction  electric loads  models  PSASP/UPI  transient analysis  stability  computer simulation

用微信扫一扫

用微信扫一扫