引用本文: | 张建坡,赵成勇.MMC-HVDC直流侧故障特性仿真分析[J].电力自动化设备,2014,34(7): |
| ZHANG Jianpo,ZHAO Chengyong.Simulation and analysis of DC-link fault characteristics for MMC-HVDC[J].Electric Power Automation Equipment,2014,34(7): |
|
摘要: |
由于拓扑和调制策略的不同,基于模块化多电平换流器的高压直流输电(MMC-HVDC)系统在直流侧发生故障时呈现出与两电平电压源型直流输电(VSC-HVDC)系统不同的故障特性。在PSCAD/EMTDC中搭建的仿真模型基础上,首先分析了MMC-HVDC直流侧线路单极接地、断线和两极短路的故障特性及其对系统运行的影响;然后针对半桥型子模块结构不能够双向阻断故障电流的问题,对子模块拓扑进行了重新设计,通过改变流经子模块电流方向,实现了桥臂电容双向充电,从而提供了续流二极管阻断电压;最后对直流侧两极短路故障进行了仿真分析,仿真结果表明,改进拓扑有效地抑制了直流侧故障电流,避免了交流断路器动作。 |
关键词: MMC-HVDC 直流故障 双向阻断 故障分析 高压直流输电 仿真 |
DOI: |
分类号: |
基金项目:国家高技术研究发展计划(863计划)项目(2013-AA050105) |
|
Simulation and analysis of DC-link fault characteristics for MMC-HVDC |
ZHANG Jianpo, ZHAO Chengyong
|
State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources,North China Electric Power University,Beijing 102206,China
|
Abstract: |
The DC-link fault characteristics of MMC-HVDC system are different from those of two-level VSC-HVDC system because of different topologies and modulation methods. Based on the simulation model established with PSCAD/EMTDC,the DC-link fault characteristics of line-to-ground,broken line and line-to-line,as well as their effects on system operation,are analyzed. The topology of half-bridge sub-module is improved to block the fault current in both directions,which,by changing the arm current path,charges the arm capacitor in both directions to set the blocking voltage of free-wheel diode. Simulation is carried out for the line-to-line fault and results show that,the improved topology suppresses the DC-link fault current effectively to prevent the trip of AC circuit breaker. |
Key words: MMC-HVDC DC-link fault bidirectional blocking failure analysis HVDC power transmission computer simulation |