引用本文:袁志方,庄劲武,陈 倩,江壮贤,陈 搏.开断速度对电磁斥力高速开断器介质恢复特性的影响[J].电力自动化设备,2015,35(7):
YUAN Zhifang,ZHUANG Jinwu,CHEN Qian,JIANG Zhuangxian,CHEN Bo.Influence of breaking speed on dielectric recovery characteristic of high-speed electro-magnetic repulsion isolator[J].Electric Power Automation Equipment,2015,35(7):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 12404次   下载 2164  
开断速度对电磁斥力高速开断器介质恢复特性的影响
袁志方1, 庄劲武1, 陈 倩1, 江壮贤1, 陈 搏2
1.海军工程大学 电气工程学院,湖北 武汉 430033;2.海军驻大连 426 厂军事代表室,辽宁 大连 116005
摘要:
为了提高电磁斥力高速开断器的介质恢复特性,在建立电磁斥力高速开断器斥力仿真模型的基础上,优化了外部驱动电路的电气参数,获取了可以将开断速度提升至37.2 m /s的参数方案,这个速度与爆炸辅助开断速度相当。设计了包含电流回路、强迫换流回路以及高压回路的强迫换流型介质恢复试验电路,完成了21.6、37.2 m /s这2种开断速度条件下的介质恢复性能分析试验,并将试验结果进行对比。另外,对介质恢复过程进行了高速摄像。试验示波图和照片说明,所提电磁斥力高速开断器斥力仿真模型是正确的,提升开断速度可以有效优化电磁斥力高速开断器的介质恢复特性。
关键词:  电磁斥力高速开断器  介质恢复特性  开断速度  高速摄像  模型
DOI:
分类号:
基金项目:国家自然科学基金资助项目(50877078,51177169,51307179,51207166);海军工程大学自然科学基金资助项目(435517F21)
Influence of breaking speed on dielectric recovery characteristic of high-speed electro-magnetic repulsion isolator
YUAN Zhifang1, ZHUANG Jinwu1, CHEN Qian1, JIANG Zhuangxian1, CHEN Bo2
1.College of Electrical Engineering,Naval University of Engineering,Wuhan 430033,China;2.Naval Military Representative Office in Dalian No.426,Dalian 116005,China
Abstract:
In order to improve the dielectric recovery characteristic of high-speed electro-magnetic repulsion isolator,the electrical parameters of external drive circuit are optimized based on its simulation model to obtain the parameter scheme for increasing the breaking speed to 37.2 m/s,which is nearly equal to the explosion assist breaking speed. A forced commutation dielectric recovery circuit composed of current loop,forced commutation loop and high-voltage loop is designed,based on which,the analytical experiments of dielectric recovery performance under the breaking speed of 21.6 m/s and 37.2 m/s are carried out and the results are compared. In addition,the photos of dielectric recovery process are shot by high-speed camera with these two speeds. Both experimental results and photos illustrate that,the simulation model is correct and the higher breaking speed can effectively optimize the dielectric recovery characteristic of high-speed electro-magnetic repulsion isolator.
Key words:  high-speed electro-magnetic repulsion isolator  dielectric recovery characteristic  breaking speed  high-speed photography  models

用微信扫一扫

用微信扫一扫