引用本文:陈骞,陆翌,裘鹏,吴佳毅,虞海泓,杜锦佩.基于双Boost交联拓扑的三相功率因数校正器[J].电力自动化设备,2017,37(10):
CHEN Qian,LU Yi,QIU Peng,WU Jiayi,YU Haihong,DU Jinpei.Three-phase power factor corrector based on cross-linked bi-Boost topology[J].Electric Power Automation Equipment,2017,37(10):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4116次   下载 1431  
基于双Boost交联拓扑的三相功率因数校正器
陈骞1, 陆翌1, 裘鹏1, 吴佳毅2, 虞海泓1, 杜锦佩3
1.国网浙江省电力公司电力科学研究院,浙江 杭州 310014;2.国网浙江省电力公司,浙江 杭州 310007;3.浙江大学 求是学院,浙江 杭州 310058
摘要:
研究了基于双Boost交联拓扑的三相功率因数校正器,其主支路三相不控整流器通过外加并联功率因数校正电路来改善网侧电流波形,提高功率因数。首先对主支路的拓扑结构以及工作方式进行分析,总结该拓扑的特点,并针对其特点提出相应的控制策略以及参数设计方案。理论分析和仿真、实验结果表明:这种新型三相功率因数校正器适用于恒功率负载场合,只需通过控制从整流器的选相开关以及双Boost交联变换器即可获得稳定的6脉波直流输出电压、理想的功率因数以及总谐波畸变率,而仅有约1/5的功率经过双Boost交联变换器。
关键词:  三相功率因数校正器  双Boost交联变换器  整流器  谐波抑制  控制  参数设计
DOI:10.16081/j.issn.1006-6047.2017.10.023
分类号:TM46
基金项目:国网浙江省电力公司科技项目(5211DS170029)
Three-phase power factor corrector based on cross-linked bi-Boost topology
CHEN Qian1, LU Yi1, QIU Peng1, WU Jiayi2, YU Haihong1, DU Jinpei3
1.Electric Power Research Institute of State Grid Zhejiang Electric Power Corporation, Hangzhou 310014, China;2.State Grid Zhejiang Electric Power Corporation, Hangzhou 310007, China;3.Qiushi College, Zhejiang University, Hangzhou 310058, China
Abstract:
A kind of three-phase power factor corrector based on cross-linked bi-Boost topology is presented. Its power factor corrector is connected with the main circuit, i. e. three-phase diode bridge rectifier, in parallel to improve the current waveform at grid side and increase the power factor. By analyzing the topology and working modes of the main circuit, the characteristics of its topology are summarized, and the corresponding control strategy and parameter design methods are put forward. The theoretical analysis, simulative and experimental results show that the novel three-phase power factor corrector is suitable for constant power load. The switches of subordinate rectifier and the cross-linked bi-Boost converter can be easily controlled to achieve the stable six-pulse DC output voltage and the ideal power factor and total harmonic distortion, with only 1/5 of the power passing through the cross-linked bi-Boost converter.
Key words:  three-phase power factor corrector  cross-linked bi-Boost converter  electric rectifiers  harmonic suppression  control  parameter design

用微信扫一扫

用微信扫一扫