| 引用本文: | 朱益华,郭琦,李成翔,常东旭,张建新,陈德扬,朱煜昆.柔性直流和常规直流并联系统功率调制策略[J].电力自动化设备,2019,39(9): |
| ZHU Yihua,GUO Qi,LI Chengxiang,CHANG Dongxu,ZHANG Jianxin,CHEN Deyang,ZHU Yukun.Power modulation strategy for parallel system of MMC-HVDC and LCC-HVDC[J].Electric Power Automation Equipment,2019,39(9): |
|
| 本文已被：浏览 4276次 下载 1859次 |
|
|
|
| 柔性直流和常规直流并联系统功率调制策略 |
|
朱益华1,2, 郭琦1,2, 李成翔1,2, 常东旭1,2, 张建新3, 陈德扬1,2, 朱煜昆1,2
|
|
1.南方电网科学研究院 直流输电技术国家重点实验室，广东 广州 510663;2.中国南方电网公司仿真重点实验室，广东 广州 510663;3.中国南方电网电力调度控制中心，广东 广州 510663
|
|
| 摘要: |
| 由于柔性直流与常规直流控制特性的差异以及并联后的相互影响，其调制策略不同于常规直流。分析了柔性直流与常规直流并联系统的协调控制策略，阐述了功率限制功能的功率分配、速率分配和无功功率控制的实现方法。结合南方电网鲁西背靠背直流调制功能的RTDS仿真研究，针对试验中暴露的缺陷深入分析了并联系统在受端交流故障情况下限制直流功率的控制特性，提出了功率限制功能与高电压穿越控制功能的协调方法以及速率分配优化方法。仿真结果表明，优化后的并联系统可按照正确的时序和速率执行功率限制功能。 |
| 关键词: 柔性直流输电 常规直流输电 功率调制 安全稳定控制 RTDS 高压直流输电 |
| DOI：10.16081/j.epae.201909023 |
| 分类号:TM721.1 |
| 基金项目:南方电网公司科技项目(ZBKJXM20180034) |
|
| Power modulation strategy for parallel system of MMC-HVDC and LCC-HVDC |
|
ZHU Yihua1,2, GUO Qi1,2, LI Chengxiang1,2, CHANG Dongxu1,2, ZHANG Jianxin3, CHEN Deyang1,2, ZHU Yukun1,2
|
|
1.State Key Laboratory of HVDC, Electric Power Research Institute, CSG, Guangzhou 510663, China;2.CSG Key Laboratory of Power System Simulation, Guangzhou 510663, China;3.CSG Power Dispatching Control Center, Guangzhou 510663, China
|
| Abstract: |
| Due to the difference between MMC-HVDC and LCC-HVDC control characteristics and the mu-tual influence under parallel connection, the power modulation strategy of MMC-HVDC is different from that of LCC-HVDC. The coordinated control strategy of parallel system of MMC-HVDC and LCC-HVDC is analyzed, and the implementation methods of power dispatching and speed rate dispatching for power limitation function and reactive power control are expounded. Combined with RTDS simulation research of modulation function of Luxi back-to-back HVDC system, the control characteristics of power limitation function of the parallel system under the condition of AC fault at the receiving end are analyzed in view of the exposed defects. A coordination method of power limitation function and high-voltage ride-through control function and an optimization method of speed rate dispatching of power limitation function are proposed. Simulative results show that the optimized parallel system can perform power limitation function at a correct timing sequence and speed rate. |
| Key words: MMC-HVDC LCC-HVDC power modulation security and stability control RTDS HVDC power transmission |
