引用本文: | 甄 威,陈 卫,陈 平,唐永红.输电线路行波仿真方法及行波试验技术[J].电力自动化设备,2011,31(6): |
| ZHEN Wei,CHEN Wei,CHEN Ping,TANG Yonghong.Simulation method and test technology of transmission line traveling wave[J].Electric Power Automation Equipment,2011,31(6): |
|
摘要: |
围绕输电线路行波测距装置性能试验方法问题,分析影响测距装置感受行波的因素,提出行波传播全过程仿真概念,给出用两端口网络描述电流互感器行波传变特性的方法,实现了包括输电线路故障、电流互感器传变、二次电缆传播、二次负荷模拟的行波传播全过程仿真,仿真获得的行波波形与现场记录行波波形相似。针对工程应用完成行波传播全过程仿真,利用研究的方法和研制的装置完成了直流输电线路行波测距装置的现场试验。 |
关键词: 输电 行波试验 行波传播 仿真 电流互感器 行波传变特性 |
DOI: |
分类号: |
基金项目: |
|
Simulation method and test technology of transmission line traveling wave |
ZHEN Wei1, CHEN Wei2, CHEN Ping3, TANG Yonghong1
|
1.Sichuan Electric Power Research Institute,Chengdu 610072,China;2.Power Advanced Tech. Co.,Ltd.,Beijing 100098,China;3.Shandong University of Technology,Zibo 255049,China
|
Abstract: |
For the performance test methods of traveling wave fault locating device for transmission line,the influencing factors on the recept of traveling wave by fault locating device are analyzed. The whole-process simulation of traveling wave propagation is proposed. The characteristics of traveling wave propagation through current transducer is described with a two-port network,which is applied to realize the whole-process simulation of traveling wave propagation,including transmission line fault,current transducer transferring,secondary cable transmission and secondary load simulation. The simulative waveform is similar to the site recorded one. The whole-process simulation of traveling wave propagation is accomplished for the engineering application and the site test of designed traveling wave fault locating device for DC transmission line is completed. |
Key words: electric power transmission traveling wave test traveling wave propagation computer simulation current transducer traveling wave transfer characteristics |