引用本文: | 王 盛,李立学,郑益惠,姚 钢,王 昕,张 杨,陈洪涛.基于多模型PI的STATCOM直接电压控制方法[J].电力自动化设备,2012,32(7): |
| WANG Sheng,LI Lixue,ZHENG Yihui,YAO Gang,WANG Xin,ZHANG Yang,CHEN Hongtao.Multi-model PI controller for direct voltage control of STATCOM[J].Electric Power Automation Equipment,2012,32(7): |
|
摘要: |
针对静止同步补偿器(STATCOM)电压控制问题,提出了一种基于多模型PI的STATCOM控制方法。该方法将多模型方法和PI控制方法相结合,控制器采用PI控制器结构,具有结构简单、计算时间短、易于实现等优点。同时利用多模型的方法,来适应不同冲击性负载下接入点电压幅值降低的不同给PI控制器造成的影响,从而满足接入点电压控制的精度与速度。仿真研究表明,多模型PI控制器相比一般PI控制器,具有更强的对于接入点电压变化的适应能力和更高的补偿精度,证明了所提方法的有效性。 |
关键词: 静止同步补偿器 电压控制 瞬时功率平衡 多模型PI控制器 |
DOI: |
分类号: |
基金项目:国家自然科学基金资助项目(60504010);国家高技术研究发展计划(863计划)(2008AA04Z129) |
|
Multi-model PI controller for direct voltage control of STATCOM |
WANG Sheng1, LI Lixue1, ZHENG Yihui1, YAO Gang2, WANG Xin1,3, ZHANG Yang4, CHEN Hongtao4
|
1.Center of Electrical & Electronic Technology,Shanghai Jiao Tong University,Shanghai 200240,China;2.Department of Electrical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China;3.State Key Laboratory of Synthetical Automation for Process Industries,Shenyang 110004,China;4.Songyuan Power Supply Company,Jilin Electric Power Co.,Ltd.,Songyuan 138000,China
|
Abstract: |
A multi-model PI controller is proposed for the voltage control of STATCOM,which applies multiple models to PI controller. The PI controller has simple structure,short computing time and easy realization,while the multi-model strategy is applied to ensure the accuracy and speed of voltage control at connecting point for different impactive loads. Simulative results show that,compared to traditional PI controller,the multi-model PI controller has better adaptability to the voltage variation at connecting point and higher compensation precision. |
Key words: STATCOM voltage control instantaneous power balance multi-model PI controller |